You can access this from the Retropie menu from within EmulationStation (see below).
Manual Configuration (Interfaces): Advanced.Connecting to WiFi Without a Keyboard: Intermediate, uses a Raspberry Pi OS built-in feature.WiFi Module of RetroPie: Easiest approach.There are five main methods to configure WiFi: After disconnecting the ethernet cable you will need to reboot to get WiFi started. WiFi will not start up if you have an hard wired ethernet connection.This step is mandatory for all solution options described below. You can start raspi-config from the RetroPie menu in EmulationStation or from the command line with sudo raspi-config. It is under menu 5 Localisation options -> L4 WLAN County in raspi-config dialogs.
In order to use the WiFi on the Raspberry Pi, you will need to first configure the WLAN Country via raspi-config.You may want to use an USB WiFi dongle, then see here. You can check to see if your WiFi dongle is compatible here. If you have a Raspberry Pi 3 or later model, WiFi is built into the Pi, if you have a Pi 2 or earlier model, then you will need a WiFi dongle. Universal Controller Calibration & Mapping Using xboxdrvĬonvert RetroPie SD Card Image to NOOBS Image Validating, Rebuilding, and Filtering Arcade ROMs Connecting to WiFi Without a Keyboard (Alternative)Ĭonnecting Via Wireless Interface Connection Daemon (Wicd)
0 kommentar(er)
